11-1 - Warranty Information
Steamatic 8800 TMU
11 - Warranty Information
To avoid misunderstandings which might occur between machine owners and the
manufacturer, we are listing causes of component failure that specifically voids warranty
coverage. Such causes listed in this section shall constitute abuse or neglect.
BloWer
failure to lubricate impellers daily with the manufacturer-recommended lubricant, to
•
lubricate bearings, to maintain proper oil levels, or to use the correct oil grade and
viscosity as recommended in blower manual.
Failure to properly maintain blower safeguard systems such as waste tank filter screen,
•
vacuum safety relief valve and waste tank automatic shut-off system.
Allowing foam to pass through blower.
•
HIgH preSSure Water pump
failure to maintain proper oil level as recommended in pump manual.
•
failure to change oil in pump at recommended intervals.
•
failure to protect pump against freezing.
•
failure to maintain pump protection shut-off system.
•
failure to use water softener in hard water areas.
•
Use of improper chemicals.
•
VaCuum tank
Failure to properly maintain filtering devices in tank.
•
failure to clean tank as recommended by manufacturer.
•
failure to maintain vacuum safety release in tank.
•
Use of improper chemicals.
•
CHemICal SyStem
Use of improper chemical.
•
failure to use water softener in hard water area.
•
Operating machine without proper chemical filter screen.
•
failure to protect against freezing.
•
Control panel
Failure to protect flow meter and water pressure gauge against freezing.
•
Summary of Contents for Steamatic 8800 TMU
Page 2: ......
Page 76: ...Water and Chemical System 6 8 Steamatic 8800 TMU Figure 6 6 Exhaust Flow Diagram 7459...
Page 78: ...Electrical System 7 2 Steamatic 8800 TMU Figure 7 1 Electrical Schematic 7458 Rev B...
Page 82: ...Electrical System 7 6 Steamatic 8800 TMU...