1-3 - General Information
Steamatic 8800 TMU
SyStem ConCept
This is how the Steamatic 8800 TMU works:
Incoming water enters the water box and is pressurized by the high pressure water
1.
pump. The water is heated by engine coolant in the tube and shell heat exchanger
and then by the engine and blower exhaust in the cross flow heat exchanger.
Cleaning solution is then injected into the pressurized water stream and the heated
2.
solution is delivered to the cleaning tool.
The solution is recovered by the vacuum generated by the vacuum pump and is
3.
collected in the recovery tank for proper disposal.
Photographs and illustrations included in this document can represent optional
equipment as well as standard equipment.
Water Box
Water pump
Heat
exchangers
Silencer
engine
Vacuum Blower
Summary of Contents for Steamatic 8800 TMU
Page 2: ......
Page 76: ...Water and Chemical System 6 8 Steamatic 8800 TMU Figure 6 6 Exhaust Flow Diagram 7459...
Page 78: ...Electrical System 7 2 Steamatic 8800 TMU Figure 7 1 Electrical Schematic 7458 Rev B...
Page 82: ...Electrical System 7 6 Steamatic 8800 TMU...