26
ID# 21179004
04/05
15.
37
40
42
42
48
35
35
Assemble upper elevator tubes (35) to
backboard brackets (48) as shown.
16.
22
48
63
65
22
63
Tighten bolt (40) in
locknut (37) until flush
(even) with the outer
edge of the locknut.
NOTE:
Refer To
Instructions
Included With
Rim Hardware
For Rim
Assembly.
(227 Goal Box)
Place two bolts through UPPER
holes of orange bracket only, as
shown. Bend board brackets (48) to
line up with holes in backboard and
secure using weld studs (63), and
nuts (22) as shown.
NOTE:
Refer To
Instructions
Included With
Rim Hardware
For Rim
Assembly.
(227 Goal Box)
Bolt bracket to board using bolts, washers
(20), and foam pad (65) as shown. Do not
over-tighten.
