8
ID# 21179004
04/05
SECTION A: ASSEMBLE THE POLES
2.
1.
WOOD SCRAP
(NOT SUPPLIED)
2
1
5"
(13 cm)
5"
(13 cm)
1
3
2
Correctly identify each pole section. Mark pole sections with tape as shown.
TAPE
(not supplied)
TAPE
(not supplied)
Bounce middle pole section (2) into top pole section (1) together using a wood scrap as shown
until they no longer move toward taped reference mark.
IMPORTANT!:
Position middle pole so that
the warning label is on the
same side as the larger
(1/2" /1.27cm) diameter holes
of the top pole.
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
OVERLAP.
NOTE:
