OffLine Separator - OLS
Checking the heater temperature (optional)
HYDAC Filter Systems GmbH
en
Page 34 / 56
BEWA OLS 3248771 en 2009-12-16.doc
2009-12-16
Checking the heater temperature (optional)
The heater-equipped OLS comes with one or two heaters, depending on
requirements. Temperature control proceeds automatically after the heater is
switched on.
In the case of units with motor pump groups, it is not possible to switch on the
heater until 60 seconds after the pump has been switched on.
Set the temperature at the outer adjustment wheel Z1. The factory setting is 55°C.
If the temperature in the heater exceeds 80°C, then the safety thermostat will trip
and the heater will be switched off.
Summary of Contents for OLS 10
Page 55: ......