7 | Performing maintenance
HYDAC FILTER SYSTEMS GMBH
42 / 64
MoWa OLFP-1-T002 4469047 en-us lq
7 Performing maintenance
In this chapter, you will find the description of the required
maintenance activities and the qualifications of the staff
needed to carry out these tasks.
WARNING
The hydraulic system is under pressure during operation
Danger of bodily injury
u
The hydraulic system must be depressurized before per-
forming any work on the hydraulic system.
7.1 Maintenance table
7.2 Changing the filter element - N1TMxxx
In this chapter, you will find the procedure for changing the fil-
ter element.
1x Allen wrench
= 5 mm
1x Allen wrench
= 6 mm
To change the filter, proceed as follows:
1.
Switch off the pump in the hydraulic system or shut the
shut-off valve at the inlet IN and outlet OUT.
Summary of Contents for OLFP-1
Page 64: ......
