Hydac OLF-10 Installation And Maintenance Instructions Manual Download

Page: 43 / 100

HYDAC FILTER SYSTEMS GMBH

Transportation/storage | 4

MoWa OLF-5 3433222d en-us web

43 / 100

4 Transportation/storage

Fully empty the filter unit/filter housing before transporting it or
putting it into storage. Remove the used filter element/filter car-
tridge and clean the inside of the filter housing.

NOTICE

Do not grip the filter unit/filter housing at the clogging indicator

The clogging indicator will be damaged/destroyed.

Grip the filter unit/filter housing with your hands on the fil-
ter housing to transport or to store it.

Store the filter unit horizontally in a clean, dry (condensation-
free) space. The permitted storage conditions are available in
chapter "

Technical Data [

}

30]

NOTICE

Incorrect storage

The clogging indicator will be damaged/destroyed.

Make sure that the clogging indicator is free, without any
contact to the floor or to other components.

Summary of Contents for OLF-10





































































































Search results

Summary of Contents for OLF-10

Reviews:

Related manuals for OLF-10

Brands by name

Popular brands

Hydac OLF-10, Installation And Maintenance Instructions Manual

Search results

Summary of Contents for OLF-10

Reviews:

Related manuals for OLF-10

Brands by name

Popular brands