background image

4 | Filter housing overview

HYDAC FILTER SYSTEMS GMBH

12 / 52

MoWa OLFBD 3708828a en-us lq

4 Filter housing overview

The OffLineFilter BiDirectional OLFBD is a small filter housing
for the fine filtration of hydraulic and lubricating fluids. The di-
rection of flow through the filter element is freely selectable
(from inside to outside or vice versa). Areas of application in-
clude for example the filtration of hydraulic and lubrication sys-
tems in industrial and mobile hydraulics.

The advantages of the OLFBD are:

– Improvement of component and system filter lifetime.

– Any direction of flow through the filter element (from inside

to outside or vice versa).

– Flow rate is drawn for the OLFBD from the cooling filtration

circuit.

– The flow rate is limited by an orifice in the filter element

(no mechanically moving parts).

4.1 Proper/designated use

Use the filter housing only for the application described in the
following:

The OffLine Filter OLFBD filter housing is a stationary sec-
ondary bypass flow filter and is used for the purpose of sepa-
rating out water and solid particles from hydraulic and lubrica-
tion fluids.

Proper or designated use of the product extends to the follow-
ing:

– Observing all instructions contained in the instruction man-

ual.

– Performing inspection and maintenance work.

Summary of Contents for OffLine Filter BiDirectional OLFBD Series





















































Reviews: