Switching the module on and off
Switching the module on and off
When pairing the CTM-SC and the CTM EF, switch the EF module on first,
using the main switch. Once you have done this, switch on the CTM-SC
module. The SC module will automatically detect that an EF module is
connected to it.
Switching off the EF module will cause all extraction processes that are
running to be aborted. During operation, wait until extraction is complete
before switching off the EF module.
In case of emergency, or when the test is complete, switch the EF module off
at the main switch.
CTM-EF 3xxx series
en(us)
Page 23 / 48
BeWa CTM-EF 3xxx 4229881a en-us 2018-03-06.docx
2017-03-06
