CSM 2000 Series
Safety Information and Instructions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 8 / 40
BeWa CSM2000 3211683h en-us 2011-12-01.doc
2011-12-01
Safety Information and Instructions
These operating and maintenance instructions contain the key instructions for
properly and safely operating the CSM.
Obligations and Liability
The basic prerequisite for the safe and proper handling and operation of the CSM is
knowledge of the safety instructions and warnings.
These operating and maintenance instructions in general, and the safety
precautions in particular, are to be adhered by all those who work with the CSM.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed herein are limited solely to using the CSM.
The unit is to be checked once a day for visible external damage.
The CSM has been designed and constructed in accordance with the current state
of the art and recognized safety regulations. Nevertheless, hazards may be posed
to the life and limb of the individual using the product or to third parties. Risk of
damage may be posed to the product or other equipment and property.
Use the CSM:
solely for its designated use
only when in a safe, perfect condition
Immediately remedy any malfunctions that might impair safety.
Our General Terms and Conditions apply. They are made available to the owner
upon concluding purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:
improper use of the CSM or use deviating from its designated use
improper assembly, installation, commissioning, operation and maintenance of
the CSM
Operating the CSM when the system equipment or systems are defective
modifications to the product made by the user or purchaser
improper monitoring of product components subject to wear and tear
improperly performed repair work
