CSM 2000 Series
Performing Maintenance
3. Clean the suction screen by
washing it out and then blowing
it out with compressed air.
4. Rotate the suction screen in
clockwise direction into the
housing with a large, flat
screwdriver.
5. Screw in the screw plug by
hand and tighten it with 12 Nm.
Disposing of the CSM
When decommissioning and/or disposing of the unit, observe all local guidelines
and regulations pertaining to occupational safety and environmental protection. This
applies in particular to the oil in the unit, components covered with oil and
electronical components.
After disassembling the unit and separating the various materials, reuse them or
dispose of them properly in accordance with local regulations.
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 33 / 40
BeWa CSM2000 3211683h en-us 2011-12-01.doc
2011-12-01
