Hydac CSI-B-1, Operating Instruction

Page: 17 / 36

CSI-B-1 CSI-B-1 Connection Overview
Setting up Connection with PC
Before connecting the CSI-B-1 to the PC, install the USB driver from the support CD
as described below (see page 12).
Connecting the Voltage Supply
Connect the 24 V DC voltage supply with terminals 1 and 2 on the clamp gib X3.
Check that the polarity is correct.
After the voltage has been switched on, the CSI-B-1 begins to operate; the sensors
are supplied with voltage through the CSI-B-1.
If the corresponding sensor is detected at the input, the LED on the CSI-B-1 lights
up green.
HYDAC FILTER SYSTEMS GMBH en(us) Page 17 / 36
BeWa CSI-B-1 3424452b 2012-04-20 en-us.doc 2012-04-20