HYDAC International OLF 5/4 Series, Operating And Maintenance Instructions Manual

Page: 8 / 24

OLF 5 with Temperature sensor
HYDAC Filtertechnik GmbH
en
Page 8
BeWa OLF-5 LL-ET_3321664a en.doc 2006-10-06
1.4 General Safety Remarks
Keep this manual near the filter unit at all times.
Apart from the manual, observance is to be maintained to any and all general and local
regulations pertaining to accident prevention and environmental protection.
Make sure to keep the safety and hazard symbols and warnings on the filter unit in a legible
condition at all times.
1.5 Electrical Hazards
All work on the electrical equipment of the filter unit may only be carried out by a
qualified electrician.
Check the electrical equipment of the filter unit regularly. Any loose
connections or damaged cables are to be replaced immediately.
1.6 Maintenance and Servicing
All safety devices and equipment must be in place and fully functional before starting up the
filter unit.
1.7 Instructions to Be Followed in the Event of an Emergency
In case of emergency press the emergency off button on the filter unit.
1.8 Structural Modifications
Do not carry out any modifications, conversions or additions to the filter unit without the
written consent of HYDAC Filtertechnik GmbH.
No modifications may be made to the components without HYDAC Filtertechnik GmbH’s
express prior written approval.
Immediately replace any unit components which are not in perfect condition.
Only use original replacement parts. When using non-OEM components it cannot be ensured
that they have been designed and manufactured so as to comply with loading and safety
requirements.
Refer to the instructions given in
Maintenance
below.