HYDAC FILTER SYSTEMS GMBH
Product and technical specifications | 3
MoWa CMP43x0-5 4191543c en-us print
21 / 60
3 Product and technical specifications
The ConditionMonitoring Package CMP is used to continu-
ously monitor fluid power systems for solid and/or liquid
contaminants.
The CMP is equipped with a gear pump which supplies the oil
to be analyzed to the MetallicContamination Sensor MCS, in
which the large metallic solid particles > 70 µm (for example,
resulting from component wear) are measured using an
inductive measuring procedure, classified in terms of size and
material properties (ferromagnetic / non-ferromagnetic) and
also counted.
Furthermore, the CMP Oil Condition Sensor HydacLab or
AquaSensor AS is available as an option. The two sensors
make it possible to determine the relative water content in the
oil (specified in percentage saturation), where the HydacLab
detects liquid contaminants with external fluids (mixtures)
using additional measures variables of conductivity and
dielectric constant and also permits conclusions to be drawn
on the aging condition of lubricating and hydraulic oils.
The CMP is used for continuous status monitoring of the plant
and indicates imminent damage. This makes it an essential
component for implementing a modern maintenance approach.
1
2
3
4
5
6
7
8
A
Summary of Contents for CMP 43x0-5 Series
Page 60: ...www hydac com ...