12
HLT 2100 / HLT 2500 analogue
Status: 2015/08/31
HYDAC
ELECTRONIC
GMBH
Part No.: 669943
E
Sealing by means of groove in cylinder base:
4.2 HLT 2500-F1 Flat profile design, with magnetic guidance
HLT 2500-L2 Flat profile design, without magnetic guidance
The installation of the linear position sensor in flat profile design with magnetic guidance
is relatively simple, as the mechanical guidance of the magnet does already exist due to
the type of system. The exact guidance of the captive-sliding magnet and non-contact
and wear free measurement system complement each other optimally. In order to
reduce the wear of the magnetic guidance unit to a minimum, the dimensional
tolerances for angle and parallel misalignment must be absolutely kept.
The accuracy of the measured values among others depends on the symmetry of the
magnetic field geometry. For the flat profile design without magnetic guidance, this
means that the magnet must be guided precisely with respect to the measuring system,
and parallel with regards to the axis and hight. The maximum permitted distance
between the magnet and the profile housing must not be exceeded.
HYDAC position magnet ZBL MF38-18:
X = 3
-2
non-ferrous distance ring
magnet ring
O-ring
Summary of Contents for HLT 2100 Series
Page 28: ...Notizen Notes Notes ...
Page 56: ...Notizen Notes Notes ...
