ETS 4000 Ex ia HART ATEX / IECEx
Page 4 of 30
Status: 2016-06-07
HYDAC ELECTRONIC GMBH
Part No.: 669918
4
Important Mounting Instructions for Conduit Connection
4.1
Installation Instructions for Units with 1/2 “ NPT Conduit
Mechanical Connection
The process connection of the temperature transmitter may only be carried out utilizing the hex.
27mm flats on the process connection side.
Electrical Installation
The flat at the electrical connection side next to the 1/2 NPT Conduit only serves to fix the
temperature transmitter during conduit installation.
Do not use for screwing
into the mechanical
connection!
Do not use for fixing the sensor
during electrical conduit
installation!
