Hyd-Mech S-20DS, Use And Maintenance Manual, Page: 21 / 138

3--3 15 Safety and accident prevention
Recommendations to the operator
Always wear proper goggles or protective glasses.
Do not use the machine without the guards in position.
Do not allow hands or arms to encroach on the cutting zone while the
machine is in operation.
Do not wear oversize clothing with long sleeves, oversize gloves, brace-
lets, necklaces or any other object that may become entangled in the ma-
chine during working; long hair must be tied back and bunched.
Always disconnect the power supply to the machine before carrying out
any maintenance work whatsoever, including in the case of abnormal
operation of the machine.
Before starting cutting operations, support the material at both ends of
the machine using the support arm --- standard, or OPTIONAL acces-
sories such as the feed and discharge roller tables shown in the diagram
below. Before removing the devices supporting and moving the material,
fasten the latter in place using the machine’s clamping devices or other
suitable equipment.
mm. 1500
mm. 1500
FEED ROLLER TABLE DISCHARGE ROLLER TABLE
Any maintenance work on the hydraulic or pneumatic systems must be
carried out only after the pressure in the system has been released.
The operator must not perform any risky operations or operations not
required for the machining operation under way (e.g. remove swarf or
metal shavings from the machine while cutting).