Hyd-Mech S-20DS, Use And Maintenance Manual, Page: 135 / 138

11--1
Accessory Installation
In this chapter are listed the accessories that may be fitted by the user to this
model of machine, along with the relative assembly instructions.
Accessories that can be fitted by the user
Blade
The blades that can be used on this machine include:
H
4500 x 27 x 0,9 bimetal blade for solid and section materials;
Can of emulsible oil
5 l can of emulsible oil.
Motor chip discharger unit
This device can be used to eliminate the chips from the chip collection drawer; for
installation, proceed as follows:
"
disconnect the machine from the power supply;
"
extract and remove the chip collection drawer;
"
fit the lower part of the discharger unit in the place of the drawer, making the
holes coincide for the screws;
"
adjust the discharger unit feet so that the conveyor belt is slightly tilted;
"
connect the machine to the power supply again;
"
Start up the machine again.
Minimal lubrication system
This device was designed to improve lubrication of the tool during cutting.
"
An instruction book is supplied with the kit to explain how to install this op-
tional unit.
11