Hyd-Mech S-20, User Manual

Page: 12 / 60

0.8
Master Disconnect
/RFNRXWWKHPDFKLQHEHIRUHXQGHUWDNLQJDQ\PDLQWHQDQFHRUUHSDLUZRUNRQLWµ/RFNRXW¶UHIHUVVZLWFKLQJ
off the master electrical disconnect switch, and locking it out so that it cannot be switched on again
without authorization.
On Hyd-Mech machines the Master Disconnect Switch will be of one of three types:
x
Rotary switch mounted in electrical control cabinet door and inter-locked with door
x
Lever switch mounted in separate box mounted on the machine
x
Supply disconnect switch supplied by user at installation and usually wall-mounted within sight of
the machine, depending upon local regulations.
In almost all jurisdictions, it is required that owners of industrial equipment establish and post lock-out pro-
cedures. Know and use the lock-out procedures of your company or organization.
Residual Risks
The machine is still not completely de-energized if an electrical cabinet door type switch is
locked-out.
The line side of the disconnect switch itself remains energized.
Variable speed blade drives store dangerous voltage in their capacitors, and this requires time to
dissipate. After locking out power, wait 3 minutes before beginning to work on machine electrical
circuits.
If compressed air is supplied to the machine to power a mist lubrication system or other devices,
it should be disconnected, and any stored air pressure released before working on the machine.
The weight of individual machine components represents stored potential energy that can be
released if they fall when disconnected. Secure these components with adequate hoisting gear
before disassembly.