HYCON HRS400 Ring Saw
HYCON A/S • Juelstrupparken 11 • DK-9530 Støvring • Tel +45 9647 5200
15
Dismounting of Front Cover and
Water Blade
Use a hex key size 4 mm to loosen the 3 screws. Remove the
front cover.
Remove the entire water blade.
Replacement of Drive Wheel
Use a hex key size 4 mm to loosen the 2 hexagon screws. You
can use a two pin wrench to prevent the drive wheel from
turning round.
If the drive wheel is worn out replace
immediately. Use only original spare parts.
Contact your local dealer for further
support and information.
