Hybrid Federal HYBDVR-FE016480, User Manual

Page: 82 / 172

Figure 5-35
5.5.2 Abnormity
Abnormity interface is shown as in Figure 5-36.

Event type: There are several options for you such as disk error, no disk,
disconnection, IP conflict and etc.

Alarm output: Please select alarm activation output port (multiple choices).

Latch: Here you can set corresponding delaying time. The value ranges from
10s-300s. System automatically delays specified seconds in turning off alarm and
activated output after external alarm cancelled.

Show message: system can pop up the message in the local screen to alert you
when alarm occurs.

Alarm upload: System can upload the alarm signal to the network (including alarm
centre) if you enabled current function.

Send email: System can send out email to alert you when alarm occurs.

Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm
occurs.
Figure 5-36
5.5.3 Alarm Output
Here is for you to set proper alarm output.