Hybrid Federal HYBDVR-FE016480 User Manual Download

Page: 128 / 172

Parameter Function

There are six periods in one day. Please draw a circle to enable
corresponding period.

Select date. If you do not select, current setup applies to today only.
You can select all week column to apply to the whole week.

Click OK button, system goes back to alarm setup interface, please
click save button to exit.

Anti-dither System only memorizes one event during the anti-dither period. The

value ranges from 3 to 600s.

Normal
Out

Enable alarm activation function. You need to select alarm output port
so that system can activate corresponding alarm device when alarm
occurred.

Alarm
Latch

System can delay the alarm output for specified time after alarm
ended. The value ranges from 1 second to 300 seconds.

Show
message

System pops up the alarm messages in the monitor interface.

Buzzer

Once you check the box here, the buzzer beeps when an alarm
occurred.

Alarm
upload

System can upload the alarm signal to the centre (Including alarm
centre.

Record
Channel

System  auto  activates  current  channel  to  record  once  alarm  occurs
(working  with  alarm  activation  function).  Please  note  current  device
shall be in auto record mode (Chapter 4.4 Schedule).

Record
Latch

System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.

Please draw a circle to enable email function. System can send out
email to alert you when alarm occurs and ends.

Tour

Display the selected video in local monitor window.

Tour interval and tour mode are set in DVR local menu (chapter 5.3.9
Display )

PTZ
activation

Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.

The PTZ configuration events include preset, tour, and pattern.

Capture

You need to input capture channel number so that system can backup
snapshot file when alarm occurs.

Copy

It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.

Save

You can click save button after you complete setup for one channel, or
you can complete the whole setups and then click save button.

Refresh

Click this button to get device latest configuration information.

7.3.2.7 Detect

Analysis the video, system enable motion detection alarm when it detects the motion

Summary of Contents for HYBDVR-FE016480













































































































































































Search results

Summary of Contents for HYBDVR-FE016480

Reviews:

Related manuals for HYBDVR-FE016480

Brands by name

Popular brands

Hybrid Federal HYBDVR-FE016480, User Manual

Search results

Summary of Contents for HYBDVR-FE016480

Reviews:

Related manuals for HYBDVR-FE016480

Brands by name

Popular brands