Alarm set: Click alarm set button, the interface is shown as below. See Figure 5-31.
(This interface is just like the abnormity setup). Please refer to chapter 5.5.2 for
detailed information.
HDD operation: You can select HDD mode from the dropdown list such as read-only
or you can erase all data in the HDD. Please note system needs to reboot to get all
the modification activated.
Figure 5-30
Please highlight icon
to select the corresponding function.
Figure 5-31
For the HDD group setup operation, please note:
Each channel
’s records can be stored into the specified HDD Group.
Each HDD Group is corresponding to several hard disks, while one hard disk is
only included in one HDD Group.
Each channel is only corresponding with one HDD Group, while one HDD Group
can store records from several channels.
Summary of Contents for HYBDVR-FE016480
Page 48: ...Figure 4 20 Figure 4 21 Figure 4 22 Figure 4 23...
Page 95: ...Figure 5 58...
Page 171: ......
