http://www.hybertone.com COIP CDMA Voice Gateway
26
C. H.323 ID
H232 ID is used to verify the account. Users can set this parameter according to the
requirements of the service provider.
D. Default Voice Gateway
This parameter is used to find the proper Gatekeeper or IP address of the equipment of the
callee. Enter the IP address, such as 192.168.2.197, or domain name, such as gk.yourisp.com.
If the softswitch system uses the non-standard port (1719 and 1720), you can add the detailed
port number at the end of the IP address or domain name of the Gatekeeper. For example, if
the port number is 7300, the IP address is 192.168.2.197:7300 and the domain name is
gk.yourisp.com:7300.
Under the direct connection mode, the COIP will forward all calls to the VoIP network to this
address.
Note: The value of this parameter must be standard ASCII characters (enter characters under the English input
mode).
3.5.1.2 Gatekeeper
Under the Gatekeeper mode, the COIP operates in the H.323 register status. When you
register through the H.323 protocol, select
“
H.323 Terminal
”
in
“
Terminal Type
”
, as shown in
the above figure. The registration mode involves the Gatekeeper and direct connection (the
direct connection mode is used for calls over the IP address). When all lines use one number,
select the single server setting mode. When all lines use different numbers, select the line
setting mode. When you select the line setting mode, each line can be registered to different
servers. The setting parameters are as follows:
