INSTALLATION OF TUBING
CLAMPS
Select the proper size tubing clamp as shown
in the chart. When installing the clamps, place
the clamp near the tube end with the top of the
clamp over the slot in the tube as shown in
Figure 9.
After adjustment of the tubing lengths, tighten
the clamp with a 5/16 inch nut driver, socket,
or open end wrench until the tubing will not
twist or telescope.
Figure 9
Tubing Clamps
Part
Description
Fits
No.
Tubing
Sizes
358756
Clamp, Size #6
1/2
all stainless steel
and 3/4"
5/16" hex head screw
Part
Description
Fits
No.
Tubing
Sizes
358757
Clamp, Size #10
all stainless steel
1"
5/16 hex head screw
Part
Description
Fits
No.
Tubing
Sizes
358758
Clamp, Size #16
all stainless steel
1 1/4"
5/16 hex head screw