17/20 METER ASSEMBLY
Capacitor Assembly
There is one 16 inch capacitor and one 13 inch
capacitor used in the 17/20 meter trap assemb-
ly.
The 3rd spacer should be centered between the
other two. Push the rain cap onto the top of
this tube and then slide this assembly into the
1" x 16" tube. Seat the rain cap over the 1 inch
tube.
DO NOT place the caplug on the 7/16" tube at
this time.
Select one 1" x 16" tube (Item 4), 7/16" x 19"
tube (Item 8), 3 spacers (Item 35), 1 rain cap
(Item 36), and 1 caplug (Item 34).
Push the spacers onto the 7/16" x 19" tube and
adjust so that the top spacer is approximately
10 inches from the top end of the tube, and the
bottom spacer is near the bottom end of the
tube.
Select a 1" x 13" tube (Item 5), 7/16" x 16"
inch tube (Item 9), 3 spacers (Item 35), 1 rain
cap (Item 36) and 1 caplug (Item 34).
Assemble the 13 inch capacitor in the same
manner as the 16 inch capacitor.
DO NOT place the caplug on the 7/16" tube at
this time_
Detail A
13" Capacitor Assembly
Detail B
16" Capacitor Assembly
Figure 5
17/20 Meter Capacitor Assemblies