Hy-Gain AV-640, Instruction & Assembly Manual

Page: 7 / 30

Tools Required For Assembly
• 1/4" Standard Blade Screwdriver • 7/16" Nut Driver
• #1 Phillips Screwdriver • 7/16" Open End Wrench
#2 Phillips Screwdriver • 10 nun Open End Wrench
3/8" Open End Wrench • Tape Measure 20'
3/8" Nut Driver • Safety Glasses
5/16" Nut Driver • Pliers
5/16" Open End Wrench
Safety Precautions
WARNING: You can be killed if the antennas, feedline, or the
equipment used to install the antenna accidentally contacts any utility
lines. Never install an antenna near power lines!
•
Be careful while climbing and carrying the antenna. It is heavy
enough to cause you to lose your balance if it is handled too casually
or if any part of the antenna snags on a gutter, ladder, tree, or other
item.
•
Mount the antenna high enough and in the clear so that it is out of
reach by any person or pet. Do not allow trees or other structures
near the radiator portion of the antenna. The counterpoise whips can
cause serious eye injury.
•
Ensure that the mast is sturdy enough to support the weight of this
antenna including the windload of the antenna.