Mounting Screw
Blower Assembly
1/4 - 20 Nut
1/4 - 20 Bolt
Angle Bracket
2. Line up the blower with the pre-drilled holes on the backside
of the furnace and firmly attach with the screws provided.
Please review the parts list and diagrams contained on pages 16-17 of this manual.
NOTE:
For your convenience your Shelter Furnace has been factory assembled and the electrical control assembly pre-wired.
1. Fasten the right and left side angle brackets to the circulation blower using (4) 1⁄4 - 20 bolts and nuts.
6
DOUBLE CHECK TO MAKE SURE YOU HAVE RECEIVED ALL OF THE REQUIRED
COMPONENTS. IF YOU FIND THAT THERE IS A PART MISSING, CALL
1-800-875-4788 IMMEDIATELY. PLEASE DO NOT RETURN THE UNIT TO THE
STORE OR TO THE DEALER.
Assembly of Unit