SHELTER INDOOR FURNACE MANUAL
MODEL: SF1000E
EPA Certified to the NSPS
2020
Warm Air Furnace Requirements.
SAVE THESE INSTRUCTIONS
Congratulations! You have selected the finest quality wood burning indoor furnace, manufactured with pride in the USA.
Please take a few moments to carefully read the owner’s manual. By taking the time to familiarize yourself with your new
Shelter Furnace, you will be able to look forward to years of trouble-free, dependable service.
Installation:
First: Check local codes. The installation must comply with all local rules and requirements.
Furnace installation is to be performed by a qualified installer. This furnace must not be installed in trailers or mobile homes.
Always have a properly installed and functioning smoke detector in your home. To prevent accidental injury, do not allow
anyone who is unfamiliar with the furnace to operate it.
Spend time familiarizing yourself with your Shelter Furnace.
It is impossible to predict how the furnace will perform due to variations in installation, fuel, and environmental factors.
Understanding that furnace performance can be impacted based upon wood species, wood quality, wood length, and wood
reloading levels will improve your overall experience.
Transportation Damage:
Every effort has been made to ensure that your Shelter Furnace will arrive in perfect condition. Any visible damage should
be noted on the freight bill at the time of delivery. If upon unpacking your Shelter Furnace you find that damage has occurred
during transit, notify your dealer immediately. Your dealer will advise you what actions must be taken to address the problem.
Disclaimer Notice:
The listed BTU rating for your new Shelter Furnace was obtained using laboratory calculations.
The actual BTU output you
experience may vary somewhat depending on the type, condition, and moisture content of the fuel used, chimney
type, and other factors.
Therefore, the manufacturer disclaims any guarantee as to the BTU output or capacity. Shelter
Industries disclaims any responsibility for the following: installation of a furnace that has been altered or modified in any
way; installation of the furnace other than as instructed in this manual; installation and/or use of any component or part not
approved by Shelter Industries for use with this furnace.
Be sure to complete your warranty registration within 30 days
of purchase in order to activate warranty coverage on your furnace. Register on-line: www.hy-c.com/warranty-serial.
Manufacturer’s Notice:
Please be advised that we periodically make changes to improve our products, therefore the information in this manual may
not be completely applicable to your Shelter Furnace. Please refer to markings on the appliance for additional information.
THIS IS A WOOD BURNING FURNACE ONLY AND SHOULD NOT
BE ALTERED IN ANY WAY.
3