Hy-Brid Lifts HB-1230, Maintenance And Troubleshooting Manual, Page: 9 / 56

SECTION 2 | MAINTENANCE
How to read the battery displays
FIGURE 3: Battery Charger LED Display
DO NOT OPERATE UNIT WHILE
CHARGING. DO NOT DISABLE
CHARGER INTERLOCK.
Power
Power
Power
Power
Green LED (ON)
Green LED (ON)
Green LED (ON)
Green LED (ON)
Red LED (OFF)
Red LED (ON)
Red LED (OFF)
Red LED
(FLASHING)
Green LED (OFF)
Green LED (OFF)
Green LED (ON)
Green LED (ON)
Red LED (OFF)
Red LED (ON)
Red LED (OFF)
Red LED
(FLASHING)
Green LED (OFF)
Green LED (OFF)
Green LED (ON)
Green LED (ON)
This display indicates that the
power is on but there is no
connection to a battery. The
charger must see
approximately five (5) volts on a
battery to deliver D/C current.
This display indicates that
power is on and that both
outputs are delivering D/C
current to the batteries.
This display indicates that
power is on and that both
outputs are finished charging
and are in a float maintenance
mode.
A flashing red light indicates
there is a problem with a
battery, such as low voltage or
a bad cell.
Battery 1 Status
Charging Ready
Battery 2 Status
Charging Ready
Battery 1 Status
Charging Ready
Battery 2 Status
Charging Ready
Battery 1 Status
Charging Ready
Battery 2 Status
Charging Ready
Battery 1 Status
Charging Ready
Battery 2 Status
Charging Ready
MAINTENANCE & TROUBLESHOOTING
HB-830/HB-1230 SUPO-658
REV A
BY CUSTOM EQUIPMENT LLC
9