
THIS CHECKLIST MUST BE USED AT THE BEGINNING OF EACH SHIFT OR
AFTER EVER SIX TO EIGHT HOURS OF USE. FAILURE TO DO SO COULD
AFFECT THE SAFETY OF THE OPERATOR.
MODEL NUMBER:
SERIAL NUMBER:
Keep inspection records up-to-date.
Record and report all discrepancies to your supervisor.
A dirty machine cannot be properly inspected.
Y — Yes/Acceptable N — No/Unacceptable R — Repaired
Description
Y
N
R
VISUAL INSPECTIONS
There are no loose or missing parts.
□
□
□
Check that warning and instructional labels are legible and secure. Ensure that load capacity is clearly
marked.
□
□
□
Check the platform rails and safety gate for damage.
□
□
□
Platform and base controls are not missing, damaged, or disconnected.
□
□
□
Electrical cables and wires are not torn, frayed, or disconnected.
□
□
□
Hydraulic hoses are not torn or loose, and there are no leaks. Hoses and the cables have no worn
areas or chafing.
□
□
□
Check the tires for damage. Check that wheel axle retaining rings and set screw in rear wheel are
tight.
□
□
□
Check that all snap rings are secure in grooves on pivot pins.
□
□
□
Functional Tests
Gate closes automatically and latches.
□
□
□
Platform Controls: Check all switches and push buttons for proper operation.
Emergency Stop (Stops all movement)
□
□
□
Drive & Up/Down Mode Switch (Selects drive/steer or elevate mode)
□
□
□
Joystick (Return to neutral, drives forward & reverse, elevates & lowers)
□
□
□
Drive Enable Trigger (Must be activated to drive)
□
□
□
Base Controls: Check all switches and push buttons for proper operation.
Emergency Stop (Stops all movement)
□
□
□
Key Switch (Selects Platform Control, Ground Control, or Off)
□
□
□
Up/Down Rocker Switch (Elevates, Lowers)
□
□
□
Alarm (Not damaged, sounds for descent, overload)
□
□
□
Wheels: Front and rear wheels rotate freely. Front wheels pivot freely.
□
□
□
Drives in slow speed when elevated.
□
□
□
Brakes: Machine stops when joystick released.
□
□
□
Pothole guards deploy and lock when platform is elevated.
□
□
□
Lift does not elevate when pothole guards are blocked.
□
□
□
DATE:
INSPECTED BY:
SECTION 3 | MAINTENANCE CHECKLISTS
3.1 | PRE-START INSPECTION CHECKLIST
BY CUSTOM EQUIPMENT LLC
MAINTENANCE & TROUBLESHOOTING
HB-830/HB-1230
SUPO-658
REV A
12
Summary of Contents for HB-1230
Page 3: ...FOREWORD MAINTENANCE TROUBLESHOOTING HB 830 HB 1230 SUPO 658 REV A BY CUSTOM EQUIPMENT LLC 3 ...
Page 54: ...NOTES BY CUSTOM EQUIPMENT LLC MAINTENANCE TROUBLESHOOTING HB 830 HB 1230 SUPO 658 REV A 54 ...
Page 55: ...NOTES MAINTENANCE TROUBLESHOOTING HB 830 HB 1230 SUPO 658 REV A BY CUSTOM EQUIPMENT LLC 55 ...