SECTION 1 | SAFETY
1.3 | SAFETY GUIDELINES
Maintenance Lock
The maintenance lock must be placed into position whenever the machine is being serviced in the raised or partially
raised position. Serious injury and/or death could result if maintenance lock is not used properly.
FAILURE TO COMPLY WITH THE LISTED SAFETY PRECAUTIONS MAY RESULT IN MACHINE DAMAGE,
PERSONNEL INJURY, OR DEATH.
Other Guidelines
•
Never work under an elevated platform until maintenance locks have been engaged.
•
Remove all rings, watches, and jewelry when performing any maintenance.
•
Do not wear long hair unrestrained or loose fitting clothing and neckties which may become caught on or
entangled in equipment.
•
Observe and obey all warnings and cautions on machine and in manual.
•
Keep oil, grease, water, etc. wiped from standing surfaces and handholds.
•
Before making any adjustments, lubricating or performing any other maintenance, shut off all power controls.
•
Battery should always be disconnected during replacement of electrical components.
•
Keep all support equipment and attachments stowed in their proper place.
•
Use only approved nonflammable cleaning solvents.
•
After maintenance, inspect the machine as described for Pre-delivery.
C
C
FIGURE 1: Maintenance Lock Use
FIGURE 2: Maintenance Lock Storage
MAINTENANCE & TROUBLESHOOTING
HB-830/HB-1230
SUPO-658
REV A
BY CUSTOM EQUIPMENT LLC
7
Summary of Contents for HB-1230
Page 3: ...FOREWORD MAINTENANCE TROUBLESHOOTING HB 830 HB 1230 SUPO 658 REV A BY CUSTOM EQUIPMENT LLC 3 ...
Page 54: ...NOTES BY CUSTOM EQUIPMENT LLC MAINTENANCE TROUBLESHOOTING HB 830 HB 1230 SUPO 658 REV A 54 ...
Page 55: ...NOTES MAINTENANCE TROUBLESHOOTING HB 830 HB 1230 SUPO 658 REV A BY CUSTOM EQUIPMENT LLC 55 ...