5
Maintenance
© Copyright
InoFlex
®
VF016 - VF026
Page 5-25
HWR Spanntechnik GmbH
Edition C
EN
5
M
AINTENANCE
5.1
G
ENERAL INFORMATION
Regular maintenance and service intervals must be maintained in order to
ensure trouble-free operation of the InoFlex
®
centering vice and the ma-
chine tool. This includes a test of functions and a visual inspection for dam-
age and wear.
Attention
In addition, observe the operating instructions of the machine tool in which
the centering vice is installed.
Keep ready the required materials for cleaning the centering vice.
5.2
M
AINTENANCE
5.2.1
M
AINTENANCE PERIODS
Perform all required maintenance on time.
5.2.2
I
NSPECTION WORK
The load bearing and the moving parts must be checked before each use
to ensure they are in perfect working condition. Damaged parts must be re-
placed immediately by fault-free parts.
Attention
Repair and replacement work on the InoFlex
®
centering vice may only be
carried out by personnel who are trained and instructed in the operation of
the machine tool.
Examine the function of all safety devices on the machine after completion
of maintenance and repair work. Protective cladding and protective covers
must be installed correctly.
5.2.3
L
UBRICANT
Use only the special lubricating grease OKS 265 from HWR Spanntechnik
GmbH (or other grease accepted by HWR).
5.2.4
S
AFETY INSTRUCTIONS
Switch-off the machine tool and secure the machine against restarting (see
operating manual of the machine tool) prior to conducting maintenance and
service work.
Summary of Contents for InoFlex VF016
Page 8: ......
