Title
Rev.
Page
HP-283 Technical Manual
Ver1.01
P.43
ESC+‟W‟+xL+xH+yL+yH+dxL+dxH+dyL+dyH
[Name]
Page mode (Area of printing)
[Format]
ASCII
ESC
W
xL xH yL yH dxL dxH dyL dyH
Hex
1B
57h
xL xH yL yH dxL dxH dyL dyH
Decimal
27
87
xL xH yL yH dxL dxH dyL dyH
[Range]
0≤xL+(xH×256)≤65535 (0≤xL≤255, 0≤xL≤255)
0≤yL+(yH×256)≤65535 (0≤yL≤255, 0≤yL≤255)
1≤dxL+(dxH×256)≤65535 (0≤dxL≤255, 0≤dxL≤255)
1≤dyL+(dyH×256)≤65535 (0≤dyL≤255, 0≤dyL≤255)
[Initial]
(xL+(xH×256))=0 (0mm, xL=0, xH=0)
(yL+(yH×256))=0 (0mm, yL=0, yH=0)
(dxL+(dxH×256))Max=512 (72mm, dxL=00h, dxH=02h)
(dyL+(dyH×256))Max=710 (100mm, dyL=C6h, dyH=02h)
[Description]
Set up the start point of printing area, and the size
Start with Horizontal : (xL+(xH×256)) x 0.141mm
Start with Vertical : (yL+(yH×256)) x 0.141mm
Size of Horizontal : (dxL+(dxH×256)) x 0.141mm
Size of Vertical : (dyL+(dyH×256)) x 0.141mm
[
Caution
]
The maximum paper width is 72mm.
The maximum paper length is 100mm.
In case the vertical extension of character, and barcode, graphic data,
If the height of printing is over against the reference point (24dots),
please move the reference point (height of printing -24) by the command LF.
Paper
(x,y) dx
Printing area
dy
(x+dx,y+dy)
Reference point
Height of printing
Before
ABCD
ABCD
After
Move to the reference point
(height of printing
-24)