Hwasung HP-283, Technical Manual, Page: 14 / 85

Title Rev. Page
HP-283 Technical Manual
Ver1.01 P.13
1)SW1 :

p(70
16
) Setting : When executing cutting command (DC3 + “i”), move from the black mark point
to the plus position up to the value set in SW2, then cut from that position.

m(6D
16
) Setting : When executing the cutting command (DC3 + "i", move up to the value set in
SW2, then cut in that position.
2)SW2 : Setting the distance from the black mark point to the cutting position
 When SW1 is @ p : You can set from 0~1200(0 ~ 150mm).

When SW1 is @ m : You can set from 0~120(0 ~ 15mm).
※Indicates 0.125mm per set value ex) When set on 100 : 100 x 0.125 = 12.5mm
※ SW1 and SW2 are also used in Windows Driver to set the Cutting option to Black Mark Search (Full
Cut). (Windows Driver : use DC3+”i” command)
ex)
ABCD ABCD
When SW1 = p, SW2 = 100 When SW1 = m, SW2 = 100
[Front, Printing Side] [Front, Printing Side]
1
2
.5
m
m
Blackmark
point
Cutting position
Blackmark
Point
Cutting
Position
1
2
.5
m
m
1page
2page
1page
2page
※Left
Blackmark
(Backside)