Hwasung HP-283, Technical Manual, Page: 32 / 85

Title Rev. Page
HP-283 Technical Manual
Ver1.01 P.31
SUB+‟R‟+n
[Name] Outline character (Tetragon)
[Format] ASCII SUB b n
Hex 1A 52h n
Decimal 26 82 n
[Range]
0≤n≤1
[Description] n=0 : Cancel the outilne character (Tetragon).
n=1 : Set up the outline character (Tetragon).
[ Caution ] The horizontal extension is valid as much as eight times.
The vertical extension is valid as much as two times.
S
UB+‟s‟+n
[Name] Speed
[Format] ASCII SUB s n
Hex 1A 73h n
Decimal 26 82 n
[Range]
1≤n≤14
[Initial] n=19
[Descirpt] n=1 : Printing Speed 70mm/s n=11 : Printing Speed 170mm/s
n=2 : Printing Speed 80mm/s. n=12 : Printing Speed 180mm/s
n=3 : Printing Speed 90mm/s n=13 : Printing Speed 190mm/s
n=4 : Printing Speed 100mm/s n=14 : Printing Speed 200mm/s
n=5 : Printing Speed 110mm/s
n=6 : Printing Speed 120mm/s
n=7 : Printing Speed 130mm/s
n=8 : Printing Speed 140mm/s
n=9 : Printing Speed 150mm/s
n=10 : Printing Speed 160mm/s
[
Caution
]
Please control the density, since that the low speed prints the density unclear.