HW Group Poseidon2 3266, Manual

Page: 84 / 104

Poseidon2
– Family manual
HW group
www.HW-group.com 84 / 104
<Submask>255.255.255.0</Submask>
- Value of the IP subnet mask (Read only when DHCP enabled)
<Gateway>192.168.1.100</Gateway>
- IP address of the Gateway (Read only when DHCP enabled)
<DNSPrimary>147.230.16.1</DNSPrimary>
- Primary DNS server (you have to set DNS server as IP address) (Read only when DHCP enabled)
<DNSSecondary>213.180.44.4</DNSSecondary>
- Secondary DNS server (Read only when DHCP enabled)
<HTTPport>80</HTTPport>
- Internal device WEB server port
<TelnetPort>99</TelnetPort>
-
Telnet setup (TCP setup) port. “0” = TCP setup disabled
<SNMPPort>161</SNMPPort>
- SNMP pooling port settings
</Network>
<SOAP> - SOAP settings
<Entry>
<Idx>1</Idx> - Destination ID
<E>1</E> - Destination Enable 0/1
<Server>192.168.1.36</Server> - Destination IP
<Port>80</Port> - Destination TCP Port
<Route>service.xml</Route> - Name of XML file
</Entry>
</SOAP>
<Report> - Alarm Reminder & Periodic status
<Entry>
<Idx>1</Idx> - ID1
– Periodical Status
<E>0</E> - Enable Function 0/1
<Period>60</Period> - Period (in minutes)
</Entry>
<Entry>
<Idx>2</Idx> - ID2 Alarm Reminder
<E>0</E> - Enable Function 0/1
<Period>5</Period> - Period (in minutes)
</Entry>
</Report>
<Portal>
<PushPeriod>30</PushPeriod> - period of sending the data to a remote server. This value is being set by a portal.
<E>1</E> - enables or disables the portal function
<Name>vitolmr</Name> - username assigns the device to a user account. Provided by a portal administrator
<Pswd>qehgLs</Pswd> - Provided by a portal administrator together with a username
<ServerAddress>www.sensdesk.com/portal.php</ServerAddress> - full URL of the remote server
<PortalPort>80</PortalPort> - Portal listening port
<PortalMessage><a href="http://www.sensdesk.com:80/sensdesk/device/779" target="_blank">SensDesk.com: Check sensor online.</a></PortalMessage>
- Portal communication status
<Portal_PushTimer>7</Portal_PushTimer> - Counts out the time to the next standard data sending
<Portal_LogTimer>7</Portal_LogTimer> - Shows the time left to next data saving to a internal memory
<Portal_ApBlockTimer>0</Portal_ApBlockTimer> - Shows the time needed before sending another AutoPush after the previous AutoPush process. This value is
being set by a portal.
</Portal>
<MIBIISysGroup>
- MIB II settings
<SysContact>support@HWgroup.cz</SysContact>
- MIB's administrator e-mail (64 chars)
<SysName>Poseidon in kitchen </SysName>
- MIB's database name (64 chars) Identical with item <Agent><DeviceName>, here R/W
<SysLocation></SysLocation>
- MIB's system database placement (64 chars)
</MIBIISysGroup>
<Email>
- E-mail settings
<Server></Server> -
DNS address or IP address of remote SMTP server (40 chars)
<Port>25</Port> -
Port for communication with remote SMTP server
<From>user@domain.com</From> -
Email address of sender (40 chars)
<Subject>Subject_0</Subject> -
Subject of Email message (50 chars)
<Auth>0</Auth> -
SMTP server Authentication (0 = not required, 1 = required, 3= TLS)
<Secure>0</Secure> -
SMTP Secure communication (0 = not required, 1 = TLS)
<Name>User login name</Name> -
SMTP authentication Login name (40 chars)
<Pswd></Pswd> -
SMTP authentication Password (20 chars)
<Message></Message> -
SMTP server report message from last TEST EMAIL (100 chars)
</Email>
<MailDest> - Email destination definition