HWg-WLD – manual
HW group
www.HW-group.com
First steps
Switch Remote Relay output over the network
HWg-WLD
Ethernet
Damocles
192.168.68.70
Output 1
State 1-normal is equal to alarm off; all other states are equal to alarm on.
Username
and
Password
must allow writing to
Target Device
.
Remote output is realized via XML communication.
Remote output is synchronized immediately after change happens. Current state is resent to
target device (e.g. Damocles) every 10 seconds.
Upgrade to last firmware version of both devices is highly recommended!
Output must be set to manual mode.
Remote ID = 150 + output number.
Summary of Contents for HWg-WLD
Page 1: ...HWg WLD MANUAL...
