HW Group HWg-WLD, Manual, Page: 16 / 16

HWg-WLD – manual HW group
www.HW-group.com
Technical specifications
Ethernet : RJ45 – 10/100 BASE-T
1 sensor input: 2 pins connector for connection sensing cable
Device features
o
Alarms by e-mail or SNMP Trap when leak sensor state changed
o
Remote output or relay (in Poseidon or Damocles device) can be controlled over network by
sensor state
o
Remote monitoring of leak sensor
o
Rack mounting possibility
Power supply: +5V / 250 mA
Dimensions: 65 x 88 x 30 [mm]
LED indicators in the RJ45 connector
o
Green: Power / Status
 Rapid flashing: DHCP network configuration in progress
 Slow flashing: A sensor is in alarm
o
Orange: Link & Activity
ETHERNET
Interface RJ45 (10/100BASE-T) – 10 Mbit or 100 Mbit network compatible
Supported protocols IP: ARP, TCP/IP (HTTP, XML, SNTP, SMTP), UDP/IP (SNMP)
SNMP compatibility Ver:1.00 compatible, some parts of the ver 2.0 implemented
SENSOR
Type Water leak sensing cable
Connector Terminal block
Sensor states 0 = OK, 1 = Water leak detected, 2 = Sensor disconnected
Sensing cable length Max 85 meters
Sensors extension Connecting cable max 100 m, one pair of AWG 24
POWER input
Power supply POWER 5V / 250 mA
Connector Jack Ø3.5 x 1.35 [mm]
LED Status indicators
POWER / status Green - power OK (status = DHCP/Local alarm)
LINK & Activity Yellow - Ethernet connectivity
Physical parameters
Operating temperature -10 to 60 °C
Dimensions / Weight
65 x 88 x 30 [mm] / 250 g
EMC FCC Part 15, Class B, CE - EN 55022, EN 55024, EN 61000