HWg-WLD – manual
HW group
www.HW-group.com
Sensors
Additional parameters
Set additional parameters on page
Services
prior to enable
Periodic Alarm
!
Single alarm
If you disable
Periodic alarm
, the alarm will be reporting only once (for each change).
Remote output
Current sensor state can open and close remote relay (e.g. device from family Poseidon or
Damocles).
Name and current state of
water leak sensor:
0 – Normal
1 – Flooded
2 - Disconnect
Select destination
for state reporting
For periodic reporting use
this check box.
For detailed settings, see
page Services
ID of remote port, must be at least 151
ID 151 = Output 1, ID 152 = Output 2 etc.
How to map alarm state
to output value
Permanently switch remote
output for testing purpose.
Summary of Contents for HWg-WLD
Page 1: ...HWg WLD MANUAL...
