HWg-STE plus
– manual
HW group
Page 9
www.HW-group.com
Sensors
- Scans for changes in connected sensors
Note:
After connecting a new sensor or exchanging an existing one, always click
Find Sensors
.
Hysteresis
Hysteresis prevents receiving tens and hundreds of alarm messages about start and ending of alarm
while the value oscillates around the Safe Range threshold.
Set the value in °C or %RH, mostly using 1 to 4°C or approximately 5 %RH is enough.
You can find more on HWg websites in
“
AN35: Poseidon
– Preventing false alarms
”:
Deletes the sensor from the list
Safe Range - device sends
an email when this
threshold is exceeded
Inactivity period before and
after each alarm
