HWg-STE plus
– manual
HW group
Page 2
www.HW-group.com
HWg-STE plus - connectors
Setting the device to its factory default
1) Turn the device off
– unplug the power adapter.
2) Open the unit and set the marked jumper.
3) Turn on the device for 30 seconds only (to set the device back to defaults).
4) Turn off the device
5) Remove the jumper set in step 2
6) Turn on the device. Factory defaults settings is restored
POWER input
5V DC power supply
Use the supplied power
adapter
ETHERNET
100 Mbps
*) PoE power only for
“HWg-STE PoE”
JUMPER for restoring factory default settings
DO NOT KEEP THE JUMPER PERMANENTLY SET!
SENSORS
S1 and S2 ports for connecting temperature or humidity
sensors.
Max distance
60m for both sensors in total
POWER OUT
Napájení 12V svorkovnice
Power
Ethernet
Sensors
SET
RJ45
RJ11 RJ11
LED indicators
Green:
Power & Mode
Yellow:
Link & Activity
Digital Inputs
2x Digital input with LED signalization
for connecting dry contact, door
contacts or relay outputs.
