Damocles2
Damocles2
Damocles2
10
11
3. Configure the network parameters
• IP address / HTTP port (80 by default)
• Network mask
• Gateway IP address for your network
• Device name (optional)
Click the
Apply Changes
button to save the settings.
4. WWW interface of the device
•
To open the WWW interface of the device:
• Enter the device IP address in a web browser
• Click the IP address in UDP Config
• Click the underlined IP address in UDP SETUP
• The WWW page displays current status of the device and its digital inputs
Important
• To reset the device to factory defaults, toggle DIP1 several times within 5 seconds
after applying power to the device.
•
No configuration changes can be stored while DIP2=On.
To change the IP address, set DIP2=Off.
!
First steps
First steps
First start
First start
Summary of Contents for Damocles2 1208
Page 1: ...Damocles2 User manual...
