Damocles2
Damocles2
Damocles2
36
37
General SNMP Settings
•
SNMP port
– Communication port to use for the SNMP protocol
[161]
.
•
SNMP Port Listener
– Port for receiving SNMP traps from Poseidon and Damocles devices in
Box2Box communication mode
[162]
.
•
SNMP Version
– SNMP protocol version setting
[3]
.
SNMP Access
Defines names and access rights for groups of users that can work with the Damocles device.
•
User name
– Textual name of the authorized group (by default
Public
and
Private
).
•
Read
– The community is authorized to read variables over SNMP.
•
Write
– The community is authorized to write values to variables over SNMP.
SNMP Trap Destination
Destinations for sending SNMP Traps.
•
User name
– Textual name of the group for the SNMP trap being sent.
•
IP address
– Destination address where the SNMP traps are sent.
•
Port
– Destination port where the SNMP traps are sent.
•
Enable
– SNMP traps are sent to this destination.
SNMP Users
Usernames and passwords for SNMPv3 communication.
•
User name
– User name.
•
Auth. Type
– Cipher type for user authentication. Available options are MD5 and SHA.
•
Auth Password
– Password for user authentication.
•
Privacy Type
– Cipher type for encrypting the communication. Available options are DES and AES.
•
Privacy Password
– Password (key) for encrypting the communication.
MIB II System Group
User-defined data in the standard SNMP header.
•
SysContact
– Contact information of the system administrator, e.g. an e-mail address.
•
SysName
– Same as the device name.
•
SysLocation
– Location of the unit, e.g. “IT room, floor 2”.
Note:
Any changes must be confirmed by clicking the Apply Changes button. A successful change is
indicated by an animation in the status bar next to the Apply Changes button.
SNMP Trap Destination
Destinations for sending SNMP Traps.
•
Community
– Textual name of the group for the SNMP trap being sent.
•
IP address
– Destination address where the SNMP traps are sent.
•
Port
– Destination port where the SNMP traps are sent.
SNMP Communities
•
Community
– Textual name of the security group.
MIB II System Group
User-defined data in the standard SNMP header.
•
SysContact
– Contact information of the system administrator, e.g. an e-mail address.
•
SysName
– Same as the device name.
•
SysLocation
– Location of the unit, e.g. “IT room, floor 2”.
Note:
Any changes must be confirmed by clicking the Apply Changes button. A successful change is
indicated by an animation in the status bar next to the Apply changes button.
SNMPv3
When the SNMP version is changed, the SNMP parameter interface also changes.
Web interface
Web interface
Summary of Contents for Damocles2 1208
Page 1: ...Damocles2 User manual...
