Huvitz Excelon XD, Operator'S Manual

Page: 22 / 120

Excelon XD/XQ Operator
’s Manual
21
4. Installation Procedure
①
Remove the shock-absorbing material from the packing box and pull out the
Edger carefully.
②
Unfasten the screw at the Edger Front Cover and lift it open.
③
Remove the Fixing materials (bracket, sponge, tape).
④
.Plug the Pump Power Cable into the receptacle for Pump at the back of the
product.
⑤
Connect Water Supply Hose into the Pump.
⑥
Connect Water Drain Hose into Water Drain Hole and tie it with the fixing clip.
⑦
Assemble the Edger Cover.
⑧
Check the Initialization.
Store the Fixing materials into the toolbox for the use of moving the product.
[Connecting the Water Drain Hose] [ Connecting the Water Supply Hose ]
Fixing Clip for Water Drain Hose
•
Fill up 2/3 of the tank with water and make sure that the water supply hose is
not dragged below the pump, and is not folded or interfered with other objects.
•
Use the Clip to tie the Water Supply Hose properly.
!
NOTE