9
5.3. General rules and safety checks.
•
Before using the machine, check the efficiency and perfect operation of all safety devices, and
check that the moving parts of the machine are not blocked, that there are no damaged parts and
that all machine components are positioned and work correctly.
•
It is entirely prohibited to manipulate the safety devices.
•
It is entirely prohibited to work without the protective shield in position.
•
It is mandatory to use gloves and protective eyewear.
•
It is mandatory to use regulation work clothing (it must be worn fastened).
•
Before starting work, the operator must ensure that all tools and wrenches used for maintenance or
adjustment have been removed.
•
In the event of a fire, use powder extinguishers and disconnect the machine from the electric
system.
6. RECOMMENDATIONS AND MAINTENANCE.
6.1. Type and frequency of inspections.
The operator’s knowledge of the machine is one of the best ways of daily control of any
possible problem. If any failure is detected, work must be stopped and qualified personnel must be
informed immediately.
NOTE
Always clean the machine and the work area at the end of the workday.
MAINTENANCE TABLE
LUBRICATION POINTS
TYPE OF GREASE/OIL
FREQUENCY
Turret travel rail
SAE 30 LUBRICATING OIL
WEEKLY
Rocker bearings (Fig. 7.4)
ROLLER BEARINGS
GREASE
ANNUALLY
CHECK POINTS
FREQUENCY
Machine cleaning
WEEKLY
Condition of the transmission belt
BIANNUALLY
Huvema
TL-400-A
Summary of Contents for TL-400-A
Page 1: ...TL 400 A Circular sawing machines Aluminium saw...
Page 20: ...2021 V1...
