10
6.2. Qualified personnel for maintenance and repair work.
•
All repairs shall be made exclusively by qualified personnel, thereby always using original
replacement parts. If not, the machine may be damaged or the user may be injured.
•
The maintenance and cleaning of the machine must not be neglected. The life of the machine and
its optimal operation depend on it considerably.
6.3. Manufacturer recommendations.
⇒
In the event that the machine is broken down or the saw blades must be replaced, place a padlock
on the protection switch and place the keys under the care of qualified personnel.
⇒
Before working on any electrical devices, disconnect the plug from the power supply.
⇒
If extension cords are used, ensure that the cable has the appropriate cross-section for the power
of the machine.
⇒
Whenever any part has to be replaced, use an original replacement part and endeavour to use the
oil recommended by the manufacturer.
NOTE
In case of any doubt or problem, do not hesitate to consult the manufacturer.
ATTENTION
The manufacturer hereby guaranties the supply of each one of the parts or components for at
least 3 years as from the manufacturing date of the machine.
ATTENTION
The manufacturer is not responsible for breakdowns caused due to the improper use of the
machine.
Huvema
TL-400-A
Summary of Contents for TL-400-A
Page 1: ...TL 400 A Circular sawing machines Aluminium saw...
Page 20: ...2021 V1...
