Huvema TL-400-A, Manual

Page: 7 / 20

7
ATTENTION
The pneumatic working pressure must be between 6 and 7 atm.
4.3. Instructions regarding blade installation.
In order to install the blade, disconnect the
power to the machine (deactivate the main switch)
and press the
EMERGENCY STOP BUTTON
.
Access the machine shaft through the sheet metal
front.
Lock the shaft using the 12 Ø rod that is
provided with the tools, and loosen the blade nut.
ATTENTION
The blade nut is reverse threaded.
DANGER
After changing the blade, put the sheet metal front back on.
4.4. Cutting coolant.
In order to fill the machine with cutting coolant, open the reservoir and fill with
PURE, NON-
EMULSIFIABLE CUTTING OIL (VISCOSITY ISO VG 16-32 CST 40ºC)
4.5. Pneumatic oil.
Both the oleo-pneumatic converters and the filter group lubricator must be filled with
ISO VG
16 VISCOSITY PNEUMATIC OIL
. If none is available, use hydraulic oil 16.
17
18
19
2
Huvema
TL-400-A