3
1. INTRODUCTION.
This instruction manual has been made in compliance with the requirements of the Legislation
according to the Machine directive 2006/42/CE and its subsequent amendments.
The instruction manual represents an integral part of the machine. It must be consulted
before, during and after the machine is put into service, as well as whenever it is considered
necessary, thereby respecting the content in each and every one of its parts.
This is the only way in which the fundamental objectives that have been established on the
basis of this manual will be achieved, such as accident prevention and making optimal use of the
machine features.
Within the framework of this manual, all aspects regarding safety and accident prevention on
the job while using the machine have been considered in every detail, herein highlighting the
information that is of greatest interest to the user.
ATTENTION
Before installing the machine, read this manual carefully. The manual must be kept throughout
the life of the machine, so that it is easy to find if necessary. In the event that the used
machine is sold, the machine shall be sold together with this manual. In the event that the
machine is scrapped, the identification plate and any other document supplied with the same
must be destroyed.
1.1 Legislation applicable to the planning and construction of the machine.
EN-12100-1/2
Machine Safety. Basic concepts, general design principles.
EN-13857
Safety distances to prevent dangerous zones from being reached by the upper
extremities.
EN-60204/1
Electrical equipment of industrial machines.
EN-13850
Machine safety; emergency stop equipment.
and is in conformity with the Essential Requirements of the Directives:
2006/42/CE
on “Machine Safety.”
93/68/CE
on the CE Marking (amendment)
73/23/CE
on “Safety of Electrical Material.”
2004/108/CE
on “Electromagnetic Compatibility.”
Huvema
TL-400-A
Summary of Contents for TL-400-A
Page 1: ...TL 400 A Circular sawing machines Aluminium saw...
Page 20: ...2021 V1...
