Insert Multiplexing
rods
5. Apply either black or white silicon (depending on
the interior colour of the case) all the way along
the top of the join, between the endframes of the
cases, only.
6. Finish the silicon neatly.
Seal along this edge only when cases are
joined together
Bentcam Door
SMART LOOK SYSTEM
Common between square
and curved canopies
PAGE 22
MPD GLASS DOOR MULTIDECK - HUSSMANN
Depending on door type, door handles will be
factory fitted, but some may become loose during
transportation of the case.
Check handles and tighten if necessary.
(This should be done after final Installation of
Refrigeration and Drainage connections)
• Use hex screws 6.3 x 19mm to fix the kickplate
support to the base. (These parts are in the
accessories box).
• Do NOT fix the kickplate support to the base too
tightly. It should be able to slip up and down
through the oblong hole. This will enable the
kickplate to be moveable and it will naturally sit
correctly in relation to the floor.
DOOR HANDLES
3.8
ATTACHING KICK PLATES
FIGURE 3U
FIGURE 3V
3.7
JOINING THE CASES
FIGURE 3W -
Door Handles Are Secure
INSTALLATION
Summary of Contents for MPD116
Page 45: ......
